sand water filter RO
  • sand water filter RO - 0 sand water filter RO - 0

sand water filter RO

sand water filter RO is a membrane separation process in which water is pressurized along the surface of the membrane. Purified water passes through the membrane and is collected, while concentrated water, containing dissolved and undissolved substances that cannot pass through the membrane, is discharged to the drain pipe. The key requirements of the reverse osmosis (RO) process are that the membrane and water are under pressure and other substances are pre-filtered to remove suspended impurities and carbon and remove chlorine (which damages the membrane). Most membranes remove 90-99+% of dissolved impurities, depending on the composition of the impurities and water. Reverse osmosis Systems (RO Systems) remove salts, microorganisms and many high molecular weight organics. System capacity depends on water temperature, total dissolved solids in the feedwater, operating pressure, and overall recovery of the system.

Send Inquiry

Product Description

Sand water filter RO

PRODUCT OVERVIEW                                  

Reverse Osmosis:The hardness of water is mainly composed of cations(Ca2+,Mg2+) in water.When raw water containing hard ions passes through the resin layer of the exchanger, calcium ions and magnesium ions in the water are replaced with sodium ions in the resin.The resin adsorbs calcium and magnesium ions from the water.In this way, the water from the exchanger is the water with the hardness ions removed.

1. High effciency

2. Small footprint

3. Easy to adjust

4. Low operating costs

5. High degree of automation,no need to be on duty

6. Save water,the water production rate of the softener reaches more than 98%

7. Save power,power consumption is equivalent to 1% of manual water softening equipment.





What's reverse osmosis system?

Reverse osmosis system is raw water through precision filter, granular activated carbon filters, activated carbon filters, compression, and then through the pump pressure, the use of reverse osmosis membrane pore size 1/10000μm make a higher concentration of water into low concentration of water, while the industrial pollutants, heavy metals, bacteria, viruses and other impurities in the water mixed  with a large number of full isolation, to achieve the required physical and chemical indicators for drinking and hygiene standards, outputs to clean pure water is the best choice of body replenish water quality. It is key equipment of pure water plant.


FEATURES AT A GLANCE                              

Product characteristics:

1.Small footprint 2.Easy to adjust 3.Low operating costs

4.High degree of automation,no need to be on duty 5.Save water,the water production rate of the softener reaches more than 98% 6.Save power,power consumption is equivalent to 1% of manual water softening equipment.


*What is Reverse Osmosis ?

Reverse osmosis (RO) is a kind of water purification technology that uses a semipermeable membraneunder pressure applied to remove ions, molecules, and larger particles , bactaria and so on from water, and is used in both industrial processes and the production of potable water.

RO reverse osmosis system is the most economical and high efficient purification method.

Desalination rate ≥99%  , 99% organic and bacteria can be removed;

Treated water under good electronic conductivity, one stage ≤10u s/cm, two stage around 2~3u s/cm, EDI≤0.5u s/cm(based on raw water ≤300 u s/cm;






*Typical Processing:

Raw water pump→ Silica sand filter → Activated carbon filter→Water softener → Security filter→ High-pressure pump→ 1st RO system...  
1. Raw water pump: provide the pressure to silica sandfilter/active carbon filter 
2. Silica Sand filter: get rid of turbidity, suspended matter, organic matter, colloid and so on 
3. Activated Carbon filter: Remove the color, free chloride, organic matter, harmful matter and so on 
4, WATER Softener: Get rid of calcium and magnesium ions in original / source water, reduce water hardness. 
5. Security filter: prevent any deposition of large Particles, most of the bacteria, and viruses into the RO membrane, The accuracy is 5um, for holding back any large particulates such as large iron, dust, suspended matter, impurity. 
6. High pressure pump-- Provide the high pressure to RO membrane(at least 2.0 Mpa). 
7. RO system-- main part of pure water treatment plant. The desaltation rate upto 99%, it is capable of removing over 99% of ions, bacterias, particles and 98% of organic.

 

 


APPLICATION



Hotels, Garment Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail,Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising Company.

PACKING

Can be customized upon request

Wooden rack packing,Customizable Individually packaged, one package per product

1 pcs in one packageLogo,Can Print your logo in the

Styrofoam protection,Wooden frame protection,Drop test Passed

Phone/whatsapp/Wechat:+86 15610189448


Hot Tags: sand water filter, China, Manufacturers, Suppliers, Factory, Customized, Cheap, Made in China, Price List, Quotation, Price
Send Inquiry
Please feel free to fill your inquiry in the form below. We will reply you in 24 hours.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy