Oxidizer Rto

Oxidizer Rto

Product Overview                                             

Regenerative Thermal incinerator is also known as: regenerative thermal oxidation furnace, English name "Regenerative Thermal Oxidizer", referred to as "RTO". So far, the application of RTO in the purification of organic waste gas has more than 30 years of history, it can be said that the technology is mature and widely used.

The principle is to heat the organic waste gas to more than 760 degrees Celsius, so that the VOC in the waste gas is decomposed into carbon dioxide and water. The high temperature gas generated by oxidation flows through the special ceramic heat accumulator, which heats up the ceramic body and "accumulates heat", which is used to preheat the subsequent organic waste gas. Thus saving fuel consumption of exhaust gas heating. Ceramic regenerator should be divided into two (including two) more than the area or chamber, each regenerator in turn through the process of heat storage - heat release - cleaning, repeat, continuous work. After the "heat release" of the regenerator, part of the clean exhaust gas that has been treated and qualified should be introduced immediately to clean the regenerator (to ensure that the VOC removal rate is above 95%), and the "heat storage" procedure can only be entered after the cleaning is completed.

Product show                                                

Product detail                                                

 Regenerative Thermal Oxidizer (RTO) uses the ceramic regenerators to store the heat generated by the decomposition of VOCs, and uses thethermal energy stored in the ceramic regenerator to preheat and decompose the untreated VOCs, thereby achieving high thermal efficiency. The oxidation temperature is generally between 800 ℃ and 850℃, up to 1100℃. Regenerative Thermal Oxidizer is mainly used in applications  where the VOCs is in low concentration and large amount of exhaust flue gas. It is also very appropaite when the VOCs contains corrosive substances which are toxic to the catalyst and which require high temperature to oxidize some odor.

  Regenerative catalytic oxidation furnace (RCO) is based on the structure of RTO. A layer of noble metal catalyst is added to the oxidation furnace to reduce the activation energy of chemical reaction and change the reaction conditions to achieve the purpose of oxidizing and removing organic waste gas at lower temperature. The RCO device is similar to the RTO device. It adopts bed or rotary design. The ceramic regenerator in the regenerator is used to replace the heat released from the reaction. Firstly, it enters the regenerator through the flame arrester of the front-end dust collector, and heat exchange is carried out in the regenerator, about 200 ~ 400 ℃, and then oxidation is carried out under the action of catalyst through the oxidation chamber. If the reaction temperature cannot be reached, the heating system can realize compensation heating through the automatic control system. The high-temperature flue gas after oxidation enters another regenerator to exchange heat, and the bottom temperature purified flue gas is discharged into the atmosphere through the chimney. The main engine of catalytic oxidation equipment is composed of flame arrester, heat exchanger, preheater, catalytic reaction chamber, main exhaust fan, control system, electric heating components and catalyst. It is the core component of the equipment.

Product Advantage                                               

RT0 structure is composed of combustion chamber, ceramic packing bed and switching valve, etc. According to the actual needs of customers, different heat recovery methods and switching valve methods can be selected; Because it has the characteristics of good treatment effect, wide coverage of industries, high thermal efficiency, and secondary waste heat recovery, greatly reducing production and operating costs. In the context of current environmental pressure and soaring prices, RTO is more economical and durable, and is favored by various industries.

Product application                                               

  Shandong Chaohua Environmental Protection Intelligent Equipment Co., Ltd. is the manufacturer and supplier of Regenerative Thermal Oxidizer Rto in China. We can provide you with professional service and more favorable price. If you are interested in gas treatment Regenerative Thermal Oxidizer Rto products, please contact us. We follow quality assured, price conscience, dedicated service. Regenerative Thermal Oxidizer Rto:RTO equipment converts waste gas containing organic pollutants into harmless substances such as CO2 and water, mainly through high-temperature oxidation reaction. The exhaust gas is fed into the RTO equipment through a circulating fan, and under the action of the preheating section, the heat energy in the exhaust gas is recovered and the fresh air is preheated to a high temperature state. The preheated exhaust gas enters the reactor, where it chemically reacts with oxygen under the action of the filler layer, converting organic pollutants into harmless substances such as CO2 and water. The treated gas is heated and cooled again by a heat exchanger, and is finally returned to the production floor or the outside world by circulating fans. In the whole process, the control system monitors the operating status of the equipment in real time and adjusts the process parameters, so as to ensure the stability and safety of the equipment. RTO is widely used in chemical industry, printing and dyeing, painting, printing, pharmaceutical and other fields. Among them, the chemical industry is one of the areas where spray towers are widely used, because the waste gas generated in the chemical production process contains a large number of pollutants that need to be treated. Our company has a large inventory, looking forward to your consultation.

SALES AND SERVICE NETWORK                                                                                       

Phone/whatsapp/Wechat:+86 15610189448