Welding fume remover

Welding fume remover

Yue Hua Chao Hua Welding fume remover is a kind of industrial environmental protection equipment, mostly used in electric arc welding, CO2 protection welding, MAG protection welding, special welding and other welding places, collecting and purifying welding fume, and the purified air is directly discharged indoors. Welding fume remover plays a role in protecting the industrial environment and protecting the health of workers.Looking forward to your inquiries！

Working Principle: The exhaust gas from the welding machine is sucked into the purifier by the negative pressure of the fan, and the large particles of dust are filtered and deposited by the equalization plate and the primary filter; the tiny level of smoke and exhaust gas entering the purification device is filtered and decomposed inside the exhaust gas device and discharged into the standard gas. (It can also be taken over and discharged to the outdoor). The basic structure has fan, filter, and dust collector and other parts, each part is installed in a vertical frame, steel plate shell, spray paint rust, beautiful appearance, scientific structure, reliable operation, easy to use.

Role Description: Some toxic substances are often produced in welding operations. Such as: acetaldehyde, rosin acid, isocyanates, nitrogen oxides, sulfides, hydrocarbons, etc.. And fly in the air. It invades into human liver, lung, cardiovascular and blood through the respiratory tract, threatening the health of operators. It leads to many occupational diseases. Such as: lung cancer, asthma, eczema, bronchitis, skin allergies, respiratory tract infections, etc., heavy disorders of the central nervous system, destroying the digestive system, leading to complications and death by failure. Welding fume remover that can effectively purify the air, but also can effectively remove the welding fume exhaust and degradation of welding fume tar flavor and a variety of toxic and hazardous gases, for you to create a beautiful and healthy working environment.

Scope of application: Arc welding, CO2 shielded welding, MAG shielded welding, special welding, gas cutting, etc. on carbon steel, stainless steel, aluminum and other metal welding fume treatment.

If the welding station is less or more dispersed, it is appropriate to use a single welding fume machine, when the welding station is more and centralized, the centralized fume purification system.

Product Features:

1、Specially designed telescopic flexible suction arm, which can be rotated 360 degrees and stretched to any position, effectively removes soot from the source and reduces air pollution.

2、The integrated high-efficiency filter cartridge has a filtration efficiency of 99.97% for welding fume (0.3μm) and maintains a very high air flow rate.

3、According to the nature of the smoke and dust, the corresponding filtration medium is selected to meet the purification treatment of different properties of smoke and dust.

4、Compact and small in size, it can be used even in narrow workplaces.

5、Installed with universal casters for lightweight and flexible movement.

6、Equipped with high-performance worm-gear fan, it has large air suction capacity and low working noise.

7、Excellent absorption stability.

8、The equipment is simple to operate and easy to maintain.

9、It does not produce secondary pollution and does not affect other operations in the workshop.

Maintenance:

Welding fume remover is designed for industrial welding fume and light particles and purification device, it is light and flexible, easy to operate, maintenance is also quite easy, the main points are as follows:

1, the initial operation, should pay attention to whether the fan is positive (such as reverse, the air volume is very small, need to change the power supply wiring).

2, maintenance must first cut off the power supply, to determine not running before maintenance, the unit shall not be opened at will when working.

3、Regularly check whether the access door, the ash door and the air duct connection system are well sealed, so as to avoid leakage and reduce the effect of dust suction.

4、Regular dust removal is carried out according to actual needs.

5、should be based on the actual situation of regular cleaning of the filter box, generally four months of continuous use need to be cleaned once, cleaning or replacement, re-installation, pay attention to the filter components on the tight pressure plate and the filter box sealing whether tight, to prevent leakage, otherwise it will greatly affect the effect of dust removal.

6、Regularly remove the accumulated dust and other impurities in the body and pipes to prevent rust and corrosion.

Technical Parameters：